After the first flame the flame would not come back on

ApplianceMaytag Dryer


Level of DifficultyA Bit Difficult

Time to do repairLess than 15 mins

Age of Appliance5 - 10 years

Tools Nutdriver
Screw drivers

Frederick From Tinton Falls, NJ

Jul 14, 2011

1 out of 4 people found this instruction helpful

Turned out to be the primary coil on the gas valve. If you remove the cover of the coils and wait for the dryer to try to start the flame the coils are energized, a magnet is turned on. By lifting the coil you should feel the magnet if the flame is on. If the flame does not come on after the ignitor fires check to see if the coils are energized. If not buy the set, it's cheaper then purchasing them separately.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Cycling Thermostat (Now subbed to Cycling Thermostat - Limit: 135/155)

Part Number: PS384006

In Stock

High Limit Thermostat

Part Number: PS2029366

In Stock