Install new L Nut and Filter Tubde ib a Reverse Osmosis Water Filter

ApplianceGeneral Electric Small Appliance

ModelN/A

Level of DifficultyA Bit Difficult

Time to do repairMore than 2 hours

Age of Appliance5 - 10 years

Tools Wrench set
Pliers
Screw drivers
Wrench(Adjustable)

Daniel From Houston, TX

Jul 10, 2011

1 out of 3 people found this instruction helpful

The filter housings (3) were all stuck on so the entire module had to be removed. The elbow fitting on the nousing cap for the RO filter became stripped and also had to be replaced. The problems were mostly due to over-tightening of the filter housings for all thre filters but also the tight quarters available to remove the tubing and get it out of the way (and also reinstalling them).

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

ELBOW 1/8 NPT X 1/4 &NUT

Part Number: PS311212

$8.41
On Order

Filter Housing and Ball Assembly

Part Number: PS311343

$97.18
In Stock