pegs on shelf support and door bin were broken during a relocation

ApplianceFrigidaire Refrigerator

Model

Level of DifficultyReally easy

Time to do repair15 - 30 mins

Age of Appliance5 - 10 years

Tools Pliers
Screw drivers

Elaine From Canon City, CO

Jul 08, 2011

0 out of 1 people found this instruction helpful

The door bin was an easy fix, just slip the edges into the raised supports of the door.
However, replacing the pegs which support the crisper bins, was a lot more difficult. Removing the old peg was not as easy as one might think. Because the pegs were broken, there was nothing to grab hold of. Having the replacement peg was helpful in determining how the old one was attached to the refrigerator wall. I needed to get a small blade screwdriver, and also a thin pocketknife blade, behind the base of the peg and wiggle them enough to get hold of it with the tip of needle-nosed pliers. The peg broke off in several pieces. Some I could remove by snapping them off and others had to be pushed in behind the refrigerator wall because there was no way to get hold of then. Once that was done, the new peg popped easily into place.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Bottom Door Bin

Part Number: PS429724

$23.45
In Stock

Crisper Support - Rear

Part Number: PS2358879

$3.84
In Stock