Washer fills but would not agitate or spin.

ApplianceKenmore Washer

Model110

Level of DifficultyEasy

Time to do repair15 - 30 mins

Age of Appliance5 - 10 years

Tools Nutdriver
Screw drivers

Anthony From Merritt Island, FL

Jul 05, 2011

0 out of 2 people found this instruction helpful

The lid switch on my Kenmore 110 had broken. I removed the two snap-on end caps from the control panel, exposing two phillips head screws. remove the screws and tilt the control panel back. Then remove the two large clips that fasten the cabinet to the back of the washer. Tilting the cabinet forward allows easy access to the lid switch, wiring, and connector assembly. 1/4 inch nutdriver needed for the ground wire fastener. Lid switch is mounted with two phillips head screws and is easily replaced.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Lid Switch Assembly

Part Number: PS350431

$28.89
In Stock