Door switch was broken

ApplianceRoper Dryer

ModelRES7646JQO

Level of DifficultyReally easy

Time to do repair15 - 30 mins

Age of Appliance5 - 10 years

Tools Screw drivers

C. Brooks From Leawood, KS

Jul 05, 2011

0 out of 1 people found this instruction helpful

I saw on your site an email from another person who had the same problem. He identified the location of the two screws that must be removed to lift up the top (under the lid to the lint screen). There also are snap-type fasteners at each of the two front corners of the top; these are released simply by pulling up. Once the top is up, the switch assembly is easily installed by removing the old switch (two small screws on the outside of the unit on either side of the switch trigger, screwing in the new one and snapping the wiring harnesses together. The snap connector only goes together one way.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Door Switch - 3 Wire

Part Number: PS346704

$18.41
In Stock