Level of DifficultyA Bit Difficult
Time to do repair30 - 60 mins
Age of Appliance5 - 10 years
Troy From Reading, PA
Dec 04, 2007
6 out of 8 people found this instruction helpful
After removing the front of the dryer, I took out the front assembly where the seal and glide brackets attatch. I replaced the bad cylinder glide by drilling the old rivets out and re-riveting the new glide in place from the back side. I then replaced the felt pads and glides on the glide brackets and glued a new cylinder seal around the front assembly. I reccomend having 4 hands for placing the cylinder seal around the assembly with fresh glue.