Level of DifficultyEasy
Time to do repair15 - 30 mins
Age of Appliance5 - 10 years
0 out of 2 people found this instruction helpful
Typical problem listed on this site. My dryer would spin but there is no heat to dry the load. Simple repair. Remove door and front panel with 4 screws. Check continuity of igniter with my $6.00 voltage meter to determine it is defective. Removal of defective part is straight forward. Unplug wire and loosen screw holding it in place. *** one note... igniter is very fragile. Handle it by the white part only. I noticed that others needed to replace certain solenoids as well. Didn't happen in my case. Next weekend... changing the bearing for the matching washer.
Were these instructions helpful?
Part Number: PS373025