Dryer was making high pitched screeching noises when running.

ApplianceGeneral Electric Dryer


Level of DifficultyReally easy

Time to do repair15 - 30 mins

Age of Appliance5 - 10 years

Tools Screw drivers

Chris From Sherwood, AR

Jun 03, 2011

5 out of 7 people found this instruction helpful

I removed the top of the dryer by removing two screws located under the front lip of the dryer over the dryer door. Then I removed the dryer door by removing the screws holding the hinges. I then removed the front panel of the dryer by removing the two screws at the top inside two corners. I the removed the old Dryer Drum Slide. The Drum Bearings were almost completley worn off. I installed the (4) new Drum Bearings (2 Clear or White and 2 brown) the same way they were installed on the old Dryer Drum Slide on the new Dryer Drum Slide. I then installed the Dryer Drum Slide the way I removed the old one. Then I pulled the old Lower Front Drum Seal-Felt and replaced with the new one. Works like new!

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Front Dryer Drum Slide (Now subbed to Drum Bearing Slide - White)

Part Number: PS755842

In Stock

Dryer Drum Slide (Now subbed to Drum Bearing Slide)

Part Number: PS6447706

In Stock

Front Drum Bearing (Now subbed to Top Bearing)

Part Number: PS9493079

In Stock

Lower Front Felt Drum Seal (Now subbed to Duct Felt Seal)

Part Number: PS9861764

In Stock