Wouldn't spin. switch cracked, not allowing contact

ApplianceRoper Washer


Level of DifficultyEasy

Time to do repair15 - 30 mins

Age of ApplianceMore than 10 years

Tools Pliers
Screw drivers

Thomas From Addison, NY

May 28, 2011

1 out of 2 people found this instruction helpful

Unplug power cord. Remove two screws at bottom front corners of control panel. Flip control panel up. Unplug switsh connector where it comes up through top of waser.Use large screwdriver to unlatch two spring clips from washer top. pull washer cabinet forward and lay on floor. Remove two screws from switch. Use plyers to remove spring clips holding wire jacket along edge of body. unclip wire connector from lid. replace new switch and clips. stand washer cabinet up and reinstall spring clips to connect cabinet and back. Plug in switch connector. replace control panel and two screws.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Lid Switch Assembly

Part Number: PS334600

In Stock