The water actuator handle snapped

Turn off the power to the appliance. The face plate comes off with three screws. Gently lift the face plate up and then out then take out the plastic strip circuit connector remembering how it plugs into the main circuit board. There are three more screws holding the unit and circuit board in the appliance, remove those . Remove the unit (if the water tube does not readily come out use the phillips head to gently push it out). Remove screws that hold the actuator and replace. Reverse the procedure and you are done. Hint: the plastic water tube does not have to be firmly set in the opening. the opening it is tapered so pressure keeeps it in