very loud noise when washing and especially spinning

ApplianceMaytag Washer


Level of DifficultyA Bit Difficult

Time to do repairMore than 2 hours

Age of Appliance5 - 10 years

Tools Wrench set
Screw drivers
Socket set

Fritz From Wasilla, AK

May 26, 2011

21 out of 22 people found this instruction helpful

Pre-ordered the spinner support & seal kit, searched online and found a repair manual, disassembled machine according to the manual, removed snap ring outside of rear bearing, used hammer and drift punch to remove bearings, went to local bearing supply store and purchased 1-6206 2RSJEM and 1-6207 2RSJEM for a total of $43. Used needle scaler to remove the ~1/8th inch of scale from inside of the outer drum and outside of the inner drum and other parts encrusted with scale. Installed new bearings and the seals and new spinner and reassembled the rest of the washer. Now we can't hear it when it spins!

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Spinner Support and Seal Kit

Part Number: PS1964673

In Stock