bottom of frezzer warm...refrigerator warm

ApplianceFrigidaire Refrigerator


Level of DifficultyA Bit Difficult

Time to do repair1- 2 hours

Age of Appliance5 - 10 years

Tools Nutdriver
Screw drivers
Socket set

jim From galveston, TX

May 17, 2011

20 out of 24 people found this instruction helpful

I first located the wiring diagram under right frt. of fridge. Using it I troubleshot the problem to be the ADC module. I ordered the ADC module and blower motor that it controls(as a precaution since that is the device that the ADC drives)After removing the icemaker and all the back panels in the freezer you can access the blower motor. The ADC module is accessible after removing the plastic panels in the top of the fridge. Look for a burn spot on the module. Be sure to order the parts using the fridge model # and not the parts # on the wiring diagram(they will have changed since the model was built). Mine needed an updated wiring harness and deleted one of the dampner motors. Be sure to replace one wire at a time so not to get confused of wire location. Pretty straight forward repair if you have some mechanical ability. I have never repaired a fridge before, but have done car electronic work.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Adaptive Defrost Control Board (Now subbed to Adaptive Defrost Control Board)

Part Number: PS2582247

Recycling Rebate Available
In Stock

Evaporator Fan Motor Kit - 120V 60Hz

Part Number: PS3419839

In Stock