Level of DifficultyEasy
Time to do repair30 - 60 mins
Age of ApplianceMore than 10 years
Screw driversSocket set
19 out of 21 people found this instruction helpful
I removed the two screws that held the electricalswitch control. Then I raised the control upward an tilted it sideways an jumped the two terminals with a screwdriver. then i knew the switch was bad. So then i removed the two pail nuts that held the switch to the switch control an removed the old switch. Then installed the new switch in the reverse proscess. This was fairly easy
Were these instructions helpful?
Part Number: PS2002869