Water leaking from left side of washer during fill cycles

ApplianceMaytag Washer


Level of DifficultyReally easy

Time to do repair30 - 60 mins

Age of ApplianceMore than 10 years

Tools Screw drivers
Socket set

John From Bethlehem, PA

May 04, 2011

0 out of 2 people found this instruction helpful

Remove two screws to take off the front. Remove two bolts to loosen the top, slide it aside. Remove one hose clamp and take out injector valve and nozzle. Lube the new nozzle with soapy water, slide the valve in and re-insert into hose. I replaced the hose clamp, but it wasn't really necessary.

Bolt down the top and replace the front and screws.

I did move the machine and clean the inlet screens, just to make sure. It did improve the hot water flow.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Hose Clamp

Part Number: PS380193

In Stock

Plastic Injector Nozzle

Part Number: PS2018687

In Stock

Rubber Injector Valve

Part Number: PS2019175

In Stock