Burner was arching or not heating up.

ApplianceWhirlpool Range


Level of DifficultyReally easy

Time to do repair30 - 60 mins

Age of ApplianceMore than 10 years

Tools Pliers
Screw drivers

Scott From Pleasant Valley, CT

Nov 28, 2007

9 out of 12 people found this instruction helpful

I followed the instructions on removing the existing burner, recepticle, and section of wire. Then followed same instructions for reinstalling above new parts. The instructions were simple and straight forward. The only gluich was that I had to drill out the rivets holding in the old hold down clips. I drilled these out with an 1/8" bit on the burner side off the opening.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Surface Burner Plug-In Block Kit

Part Number: PS340571

In Stock

Surface Burner - 8" - 2600W

Part Number: PS382106

In Stock

Surface Burner Stabilizer Clip Kit

Part Number: PS389114

In Stock