quit pumping water

ApplianceKitchenAid Dishwasher

Modelkudi02irbl4

Level of DifficultyA Bit Difficult

Time to do repairMore than 2 hours

Age of Appliance1 - 4 years

Tools Wrench set
Nutdriver
Screw drivers
Socket set
Wrench(Adjustable)

Robert From West Middlesex, PA

Apr 25, 2011

6 out of 6 people found this instruction helpful

I removed the dishwasher from under the counter. This took the bulk of the repair time along with disconnecting the water supply and electrical connection. I had enough slack in drain hoses that I could turn the dishwasher over to replace the motor. I was surprised that there was only one bolt that held the motor in place. I put the motor on, turned the dishwasher upright and slide it back unde the counter and began the long process ofreconnecting everything. I am sureit could have gone faster if I were younger and did not need glasses for close work. Start to finish took me four hours. This was the fourth time I have replaced motors in dishwashers of various makes.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Circulation Pump Motor with Impeller - 60Hz 120V

Part Number: PS2363114

$137.62
In Stock