Agitator did not spin

ApplianceWhirlpool Washer


Level of DifficultyReally easy

Time to do repairLess than 15 mins

Age of ApplianceMore than 10 years

Tools Wrench set

Michael From Sunnyvale, CA

Apr 20, 2011

0 out of 1 people found this instruction helpful

I followed the directions on your website. I popped the fabric softener cap off. Removed the 1/2" bolt from the agitator with a ratchet wrench with an extension and lifted the agitator off the spindle. Using a small, flathead screw driver, I separated the upper half of the agitator from the lower half. Replaced the cogs and put everthing back together. One caution, make sure the plastic prongs of the lower half of the agitator are lined up with the holes in the upper half and are seated before reattaching the agitator to the spindle.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Agitator Directional Cogs

Part Number: PS388034

In Stock