Tub wouldn't agitate or spin, but would pump water out

ApplianceWhirlpool Washer

Model

Level of DifficultyEasy

Time to do repair30 - 60 mins

Age of ApplianceMore than 10 years

Tools Screw drivers
Socket set

Len From Tariffville, CT

Apr 20, 2011

0 out of 1 people found this instruction helpful

I lifted the control panel out of the way and removed the machine outer shell. Removed the 2 clips holding the pump against the motor and swung the pump out of the way. 2 more clips holding the motor up had to be removed. The old drive coupling was broken on the floor. I pried the broken plastic fingers off the motor shaft and washer shaft, replaced with new fingers. The only hard part was lining up the fingers with the new rubber coupling. Reassembled motor, pump, shell and control panel. It worked!!!!!

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Direct Drive Motor Coupling

Part Number: PS1485646

$11.77
In Stock