The machine would not cycle properly. Sometimes it wouldn't empty from the wash cycle or start a rinse cycle.

ApplianceMaytag Washer

Model

Level of DifficultyReally easy

Time to do repairLess than 15 mins

Age of ApplianceMore than 10 years

Tools Nutdriver
Screw drivers

Robin From Eddyville, IA

Nov 25, 2007

3 out of 4 people found this instruction helpful

First: I removed the cap from the timer knob then the locking washer which held the knob in place, which allowed me to remove the knob and spring. Second: I loosened the 2 bolts that hold the timer in place. Third: remove the screws which hold the front cover assembly in place and and tilt it forward. Fourth: complete removing the mounting bolts for the timer and remove timer. Last: unplug the 2 wiring harnesses and you have the timer removed. Reverse the order to install the new timer. It is soooooooooo easy! Make sure not to loose any of the screws or the locking washer! set them in a safe place.
First and foremost, if you order your part for overnight delivery, stay on top of tracking it. My 10 minute job took me 1 week to get my overnighted part as Fedex "LOST THE PART!" They told me the lable had been torn off, but this was not the case when it arrived!
GOOD LUCK!!!

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Timer (Now subbed to Timer)

Part Number: PS2019463

$135.29
In Stock