Broken door handle needed to be replaced

ApplianceGeneral Electric Microwave

Model

Level of DifficultyEasy

Time to do repairLess than 15 mins

Age of ApplianceMore than 10 years

Tools Screw drivers

MATTHEW From SAN RAMON, CA

Mar 23, 2011

1 out of 1 people found this instruction helpful

The door handle on the microwave had broken at the bottom fastener, and several glue repair attempts had proved futile over time. After removing the existing handle, I needed to bore the existing hole a little, to remove glue and plastic remnants. So I used a 5/16" drill bit and bored the hole to a depth of about 1/8." Once this was done, I used the existing fasteners and attached the new door handle. No movement in the handle when the door is pulled.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Door Handle

Part Number: PS232251

$94.18
In Stock