Would not complete the "White" or "Color" cycle.

ApplianceMaytag Washer

ModelMAV4057AWW

Level of DifficultyEasy

Time to do repair15 - 30 mins

Age of ApplianceMore than 10 years

Tools Nutdriver
Screw drivers

Jorge From Corona, CA

Mar 14, 2011

7 out of 8 people found this instruction helpful

Would not complete the "White" or "Color" cycle, it would get stuck on the rinse section. The only cycle that would complete was the Delicate cycle.

The Repair was quite simple. By removing the upper rear plate, you have access to all of the control and switch parts of the washer. It takes 5 screws to completely remove it.
Removing the cycle selector knob was easy too. With a screwdriver you can remove the top cap of knob. Once thats done all you do is remove the small metal clip(easy remove and replace).
Unplug the main electric connector and ground from the timer.
Once the knob is off, all you have to do is remove the 2 screws in the front(right behind the knob).

Easier than I thought for a first time.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Timer

Part Number: PS2020528

$119.30
In Stock