Would not heat sometimes

ApplianceMaytag Dryer

ModelLAT9806AAE

Level of DifficultyEasy

Time to do repair15 - 30 mins

Age of ApplianceMore than 10 years

Tools Screw drivers

Chris From Laguna Niguel, CA

Nov 21, 2007

17 out of 18 people found this instruction helpful

Pulled the big front panel by removing two screws near bottom of front and pulling out at bottom until the top pops loose. Vacuumed out all of the dust and checked for loose connections. Ran dryer - igniter would light, but no gas. Checked the two solenoids with a VOM. the one with the two leads would intermittently read Infinity (open). Super simple repair. Remove two screws on solenoid bracket on top of the gas valve, Replace solenoid and plug it back in with the easy push-on connector. NO PROBLEM - all fixed.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Gas Valve Secondary Coil (Now subbed to 'M' Series New Style Coil Kit)

Part Number: PS334310

$13.95
In Stock