WATER OVERFLOWING ICE TRAY AND FREEZING ENTIRE MECHANISM INTO SOLID BLOCK OF ICE

ApplianceGeneral Electric Refrigerator

ModelGSS22JERFWW

Level of DifficultyReally easy

Time to do repair15 - 30 mins

Age of Appliance1 - 4 years

Tools Wrench set
Nutdriver
Screw drivers

R.J. From SEBRING, FL

Feb 25, 2011

5 out of 5 people found this instruction helpful

SHUT OFF WATER SUPPLY LINE TO REFRIGERATOR, PLACE TOWEL OR RAG UNDER CORNER OF REFRIGERATOR WHERE UNIT IS LOCATED (TO CATCH SPILLAGE WHEN LINES ARE DISCONNECTED).REMOVE BACK COVER WITH 1/4" NUT DRIVER /LOOSEN INLET LINE COMPRESSION NUT WHILE UNIT IS STILL ATTACHED(EASIER TO LOOSEN NOW THAN WHEN UNIT IS FLOATING AROUND LOOSE)/REMOVE UNIT FROM FRIDGE THEN DISCONNECT LINE AND WIRES.REVERSE PROCESS TO INSTALL.WATER LINES GOING TO WATER DISPENSER&ICEMAKER ARE MARKED/WIRE CONNECTIONS ARE IDIOT PROOF.CHECK FOR LEAKS BEFORE PUSHING FRIDGE BACK TO WALL. THATS NOT IDIOT PROOF!

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Water Inlet Valve

Part Number: PS966952

$34.18
In Stock