Baking Element was burned out.

ApplianceGeneral Electric Range

ModelJSP27OJ6

Level of DifficultyEasy

Time to do repair15 - 30 mins

Age of ApplianceMore than 10 years

Tools Nutdriver
Screw drivers

Richard From Moore, SC

Feb 22, 2011

0 out of 1 people found this instruction helpful

Replaced both the baking element and the broiler element. The baking element was the only one burned out, but my wife insisted on replacing both since the oven was 20 years old. I cut the power to the oven by turning off the breaker first. I then used a nut driver to remove the two screws holding the baking element in, pulled out he element to get to the two wires attached & used the nut driver to remove the two screws holding the wires. Removed the old element & attached the wires to the new element, slid the element back into place & replaced the two screws, done! Did basically the same procedure to replace the broiler element, except I found that a striaight screwdriver worked better on the screws for it. Also, it helps to remove one screw from the support bracket for the broiler element & swing it out of the way. The only difficulty was having to work over the open oven door, however, it only took me about twenty minutes to replace both elements. Turned the breaker back on & oven works like a charm!

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Broil Element

Part Number: PS249411

$20.34
In Stock

Bake Element - 240V 2300W

Part Number: PS249466

$21.38
In Stock