freezer would not defrost, clicking noise top right inside

ApplianceJenn-Air Refrigerator


Level of DifficultyA Bit Difficult

Time to do repair15 - 30 mins

Age of Appliance5 - 10 years

Tools Screw drivers

Michele From Austin, TX

Feb 16, 2011

22 out of 619 people found this instruction helpful

remove large cover, look to the back and ease down over prongs and slide toward you and out. Remove water filter.
Remove light bulbs, so you don't see spots:) Remove to bolt heads at back and gold screw holding gold box on left (it will not fall down) remove temperature plate (two bolt head above), and two more large head screws, right behind light bulbs, box large plastic cover should tilt down. Back in the tray of the cover, will be the white box with the defrost control, lift out and unplug. Plug in the same way. Re assemble putting in the the two back screws first, and then the gold box screw, two behind the lights. Place the temp control plate and screw that in with the other two bolt heads. Cross your fingers :)

I didn't unplug the fridge, but reccommend you do.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Adaptive Defrost Board

Part Number: PS2061226

In Stock