Noise and Heat will not stay on (Gas Dryer)

ApplianceMaytag Dryer


Level of DifficultyEasy

Time to do repair30 - 60 mins

Age of ApplianceMore than 10 years

Tools Nutdriver

Rick From Marlborough, MA

Feb 05, 2011

2 out of 3 people found this instruction helpful

Parts that were recommended for the noise issue were spot on. Instructions were very helpful and made the job go very smooth. Replaced the belt, rollers don't forget to order (2) felt pad and idler pulley replaced.
The part suggestions for the heat problem did not fix the problem. The burner flame would come on for 2-5 min. then go off. A few min. later the burner would try to ignite but would not start. The igniter would get cherry red but no activation. I end up replacing the coil kit. Turned off the gas removed (2) screws and wala done 5 min. and it fixed the problem.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Thrust Washer

Part Number: PS333174

In Stock

Single Drum Glide Felt Pad

Part Number: PS1610155

In Stock

Drum Support Roller

Part Number: PS2039408

In Stock

Drum Glide

Part Number: PS2039613

In Stock

Multi-Rib Belt

Part Number: PS2041323

In Stock

Idler Pulley Wheel with Bearing

Part Number: PS2200898

In Stock