squel while running

ApplianceMaytag Dryer


Level of DifficultyEasy

Time to do repair30 - 60 mins

Age of Appliance5 - 10 years

Tools Socket set


Feb 04, 2011

2 out of 5 people found this instruction helpful

remove front panels starting with lower panel and then the upper panel and also the screws that hold the top,lift the to and support it out of the way. removed the front drum support and reached in and took the belt off the idler pulley and then remove the drum. at this point you can get to the idler pulley and the drum support rollers. remove the snap rings and the old rollers and pulley and install the new parts in revers of removal. wrap the new belt around drum and place the drum on the rear support and reinstall the front drum support and put the belt on the same way as removed. reinstall front panels . done
Safety note: Be sure that the dryer plug and receptacle has no corrosion, mine did since the dryer is never unplugged since being installed, and after about 1/2 hr I could smell something burning and it was the plug and receptacle had melted due to a poor connection. Temp of the plug was over 160 deg. Installed new outlet and plug, all fine now

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Drum Support Roller

Part Number: PS2039408

In Stock

Multi-Rib Belt

Part Number: PS2041323

In Stock

Idler Pulley Wheel with Bearing

Part Number: PS2200898

In Stock