Clothes were getting caught in the drum and causing burn marks

ApplianceFrigidaire Dryer


Level of DifficultyReally easy

Time to do repair30 - 60 mins

Age of Appliance5 - 10 years

Tools Screw drivers

Teresa From Indianapolis, IN

Feb 03, 2011

0 out of 1 people found this instruction helpful

The upper glides were worn off and the felt had worn down causing the drum to have a gap at the bottom between the drum and the front panel. Clothes would get caught in this gap.
Removed the top cover and front cover. You do not have to remove the drum to install these parts.
I pulled off the old seals and guides. I used a Dremmel and wire brushed off the old glue. Applied the new glue [supplied with parts] and attached the new seal and guides. While the glue was drying I installed the new belt.
Reinstalled the front panel and the top panel.
Works like new.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Front Lower Drum Seal

Part Number: PS460194

In Stock

Upper Drum Glide

Part Number: PS470317

In Stock

Drum Belt

Part Number: PS1148434

In Stock