installed a new switch assembly

ApplianceRoper Washer

ModelRAX4232KQO

Level of DifficultyEasy

Time to do repair30 - 60 mins

Age of Appliance5 - 10 years

Tools Pliers
Nutdriver
Screw drivers

Donna From Leesburg, FL

Feb 01, 2011

0 out of 1 people found this instruction helpful

WE watched a video you had on your web sight, which was very helpful. We screwed the 2 long screws at the back of the top control panel out. There was one on the left side and one on the right side. Tipped the control panel back and then snapped out the 2 clips on each side of the control panel in the front.We then pulled the sides of the washer out, we were able to get at the old switch assembly, removed it and then proceeded to put the new switch assembly in. Then reassembled it back as we had taken the screws, clips ect. off. Saved us a labor bill and wasn't all that hard.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Lid Switch Assembly with Leads

Part Number: PS350434

$30.40
In Stock