Broken lid switch

ApplianceRoper Washer

Model

Level of DifficultyEasy

Time to do repair15 - 30 mins

Age of Appliance1 - 4 years

Tools Screw drivers
Socket set

Ken From Lake Success, NY

Jan 31, 2011

0 out of 1 people found this instruction helpful

Loosened the two screws holding the control panel to the base. Flipped the panel over the back plate, disconnected the switch to the panel and unhooked the two metal latches. The whole front panel and top come apart as one piece. You lay the unit on the front putting something on the ground to ensure you don't scratch the unit. Changing the switch took about one minute. There is only one screw holding the groundwire and two screws are supposed to be holding the switch. On my, the switch had broken free from these two screws. I put in the new switch unit in about two minutes. While the washer was apart, I spent time cleaning up places that needed to be wiped down. I then put it all back together.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Lid Switch Assembly with Leads

Part Number: PS350434

$30.40
In Stock