washer leaking

ApplianceMaytag Washer

Modela9200

Level of DifficultyEasy

Time to do repair15 - 30 mins

Age of ApplianceMore than 10 years

Tools Pliers
Nutdriver
Screw drivers

danny From Seymour, IN

Jan 29, 2011

5 out of 6 people found this instruction helpful

First I took all the screws out of the side and back cabinet, then tried to pry off the top, after breaking a couple of clips, saw that the front came off with two screws at the bottom, then removed, then two hex head screws to hold on the top, then lift top and saw that the injector was clogged and leaking out the top. If I had read the repair section first, I could have saved alot of time by not removing all the side and back screws. This would be a simple 15 minute job, if you follow the repair guide. Just cut off the clamps, stick in the injector and holder , reclamp and reassemble the washer.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Plastic Injector Nozzle

Part Number: PS2018687

$4.06
In Stock

Injector Tube Seal

Part Number: PS2018973

$3.96
In Stock

Injector Sleeve

Part Number: PS2019020

$4.06
In Stock

Rubber Injector Valve

Part Number: PS2019175

$8.07
In Stock