Oven would not heat up!

ApplianceGeneral Electric Range


Level of DifficultyReally easy

Time to do repair15 - 30 mins

Age of Appliance1 - 4 years

Tools Socket set

Joseph From Poughkeepsie, NY

Jan 27, 2011

7 out of 7 people found this instruction helpful

First remove the oven door. Then remove the grills,and finally the bottom cover plate exposing the oven igniter assembly.The only tool needed is a 1/4 inch socket to remove approximately eight screws.The igniter is a plug type device having a male amphenol.Pull the wires towards you to expose the connector,make the repair being careful to shove the connector back from whence it came and reassemble all the parts..Done!

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Oven Igniter

Part Number: PS952863

In Stock