Knob craked and broke off the start switch

ApplianceFrigidaire Dryer

ModelGLET1142CS0

Level of DifficultyEasy

Time to do repair30 - 60 mins

Age of Appliance1 - 4 years

Tools Pliers
Screw drivers

Greg From Lampasas, TX

Jan 13, 2011

90 out of 160 people found this instruction helpful

Removed all the knobs but the master washing machine control knob, then the control and cover panels by removing the two screws that held each one. Then removed the end plastic pieces to allow access to screws holding the switch onto control panel. Used pliers to pull wires off the old switch and put them back on new switch. Screwed it back in place and re-attached plastic end pieces. Re-attached the control panel, then the cover panel under the control panel.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Start Switch

Part Number: PS1146154

$24.36
In Stock

Rotary Knob

Part Number: PS2330889

$8.16
In Stock