Dryer would not heat.

ApplianceKenmore Dryer


Level of DifficultyEasy

Time to do repair15 - 30 mins

Age of ApplianceMore than 10 years

Tools Screw drivers

Jimmy From Euharlee, GA

Jan 03, 2011

1 out of 2 people found this instruction helpful

After disconnecting power cord, I removed the bottom front panel and disconnected 4 wires. I removed the screws, and the old parts, replaced the new parts, put the screws back in, and re-connected the 4 wires. One of the fuses only required one screw, and had a little clip to go into the other hole. The job probably took about 5 minutes, but I cleaned lint from inside the dryer. After replacing front panel, and connected the power cord, the dryer heats fine.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Thermal Cut-Off Kit

Part Number: PS334278

In Stock