Level of DifficultyEasy
Time to do repair30 - 60 mins
Age of ApplianceMore than 10 years
3 out of 5 people found this instruction helpful
turn off breakerturn off water supply linenote wire color locations on notepaddisconnect 2 spade lugs (pliers)disconnect inlet line (adj. wrench)disconnect outlet line (pliers on hose clamp)remove old valve assembly (4 screws w/nutdriver)remove ground jumper from old valveremove inlet pipe ell from old unit (vise & pliers)clean open end of pipe ell (file)apply teflon dope tape to pipe threadsinstall pipe ell on new valvereorient solenoid 90degrees cw to match Maytag installationreinstall ground jumperinstall new valve assembly in dishwasherreconnect hose and hose clampreconnect inlet linereconnect spade lugsturn on supply line, check for leaksturn on breakerstart washer at appropriate cycle to test water flowdone!
Were these instructions helpful?
Part Number: PS2098994