Level of DifficultyReally easy
Time to do repairLess than 15 mins
Age of Appliance1 - 4 years
Chris From DeRidder, LA
Nov 13, 2007
8 out of 11 people found this instruction helpful
From learning the hard way on a previous repair, I opened the circuit breaker for the oven at the circuit box (arc welders use 220 volts also). Then using a nut driver, I removed the two retaining screws and pulled the bake element from the oven (about 3"). Then I removed the spade connectors on both ends of the element and reconnected them to the new element. Then I gently pushed the element back into the rear wall of the oven and replaced the retaining screws. This procedure is extreamly easy and very straight forward, anyone could accomplish this task.