Drum Roller worn out

ApplianceAmana Dryer


Level of DifficultyEasy

Time to do repair30 - 60 mins

Age of Appliance5 - 10 years

Tools Nutdriver

Terry From Greer, SC

Dec 19, 2010

0 out of 1 people found this instruction helpful

It was a rather simple repair. First turn off power to machine as you will be working near live electrical connections. Remove screw on bottom front pannel then remove screws from top front pannel and remove screws that hold top down in front. Note that machine does not need to be removed from laundry closet as long as you can access the front of the machine. Remove lint tube at bottom then unhook wires from door swithes noting which ones are to be connected to which connectors. (write them down with location). remove front drum support screws (4) and then disconnect drum drive belt but extending spring roller bracket and lifting belt off motor drive pulley. At this point lift drum out of cabnet to give full access to the back of machine. Using snap ring pliers remove lock ring from front of roller shaft and slide roller off. Don't lose the spring washer. Clean all parts and vacuum inside of dryer to remove all access lint that has accumilated that could cause a fire. Remember safety first. When all is clean, lubricate roller shaft with lightweight lithium grease and reinstall roller with spring washer and snap ring. Reassemble dryer in reverse order of disassembly. It was a 30-40 minute project including cleaning time.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Drum Support Roller

Part Number: PS2039408

In Stock