Replace bake element ( lower )

1ST..Cut power at circuit breaker.
2ND..Using nut driver, remove two sheet metal nuts.
3RD..Gently tilt element upward and pull out until wire connectors show. There are two wires with flat connectors, use the vise grips to hold the wires so they don't slip back behind the wall of the oven, if they do, you will have to pull out the range from the wall and retrieve them! ( I used two surgical hemostats for this.)
4TH..disconnect the old element, connect the new one....
5TH..Gently slide element back in place, replace sheet metal nuts.
6TH..reset circuit breaker