Timer would go though all the cycles, but washer would not drain after the spin cycle.

ApplianceMaytag Washer


Level of DifficultyEasy

Time to do repair15 - 30 mins

Age of Appliance1 - 4 years

Tools Nutdriver
Screw drivers

Alden From Evergreen, CO

Dec 15, 2010

7 out of 10 people found this instruction helpful

Unplug washer form the electrical outlet. Remove cap on timer knob, then remove keeper (expansion button) to release the knob, knob will not just pull off without these steps. Remove the 6 screws on the upper cover, lift off cover, unplug timer and remove the one screw, depress tap, remove timer. Install new timer, reverse the above steps. Timer will still install fine if it comes in with one tabs broken off.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability


Part Number: PS2027861

In Stock