ApplianceKitchenAid Small Appliance
Level of DifficultyA Bit Difficult
Time to do repairLess than 15 mins
Age of Appliance5 - 10 years
Kevin From Waterford, MI
Dec 11, 2010
0 out of 1 people found this instruction helpful
Get a very thin 7mm open end wrench to fit under drive coupling and blender housing. ( I got mine from a hobby store and is used to work on small gas airplane motors). There are flats on the motors shaft to fit wrench to. The secret about this part is that the threads that screw this part on is a reverse thread so to unscrew it you must hold wrench and turn the drive coupling clockwise. Reverse to put new one on.
I would suggest to buy 2 of these because it will break again due to the design.
|Part Photo||Part Description||Price||Availability
Part Number: PS401661