Dryer Drum Does not Spin

ApplianceMaytag Dryer


Level of DifficultyReally easy

Time to do repairLess than 15 mins

Age of Appliance5 - 10 years

Tools Screw drivers
Socket set

Daniel From Pittsburgh, PA

Dec 10, 2010

0 out of 1 people found this instruction helpful

Step 1 - Open the top
Step 2 - remove the front of the dryer(remember to disconnect the switch before you take off the panel.
Step 3 - Put flashlight under drum on the left to "light-up" the area
step 4 feel around the back right and find the Motor shaft and the pulley, make sure they are in tact.
step 5 feel on the floor and remove the broken belt
step 6-slightly lift the front of the drum off the front rest and slide the belt over the drum
step 7 rest the drum back down and slide the belt into position
step 8 put the belt around the motor shaft and pulley as per the diagram with the dryer and the belt

step 8 replace front panel
step 9 - close top
step 10 dry clothes

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Multi Rib Belt - 92-1/4"

Part Number: PS346995

In Stock