Oven not getting hot/no flame no gas.

ApplianceGeneral Electric Range

ModelGEGasSingleoven

Level of DifficultyEasy

Time to do repair15 - 30 mins

Age of Appliance1 - 4 years

Tools Nutdriver

Guadalupe From Stockton, CA

Dec 09, 2010

82 out of 86 people found this instruction helpful

Step 1. Pull oven out disconnect power,turn off gas & remove gas line from stove.
Step 2. Remove broiler drawer,locate igniter & safety valve.
Step 3. Disconnect 2pin molex connector for igniter and faston connectors from
valve.
Step 4. Use nut driver remove fasteners that hold igniter and valve remove gas line and feed
from valve.
Step 5. Replace valve and igniter.Repeat steps 4-1 and start baking.

Note: You may only need a igniter and not a valve,both were bad on my unit.
Most often it's just the igniter that goes out.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Flat Style Oven Igniter Kit

Part Number: PS231280

$38.36
In Stock

Oven Safety Valve - Natural Gas

Part Number: PS233885

$90.46
In Stock