Machine stopped spinning the water out after wash cycle. The timer would advance, but the original wash water was still in tub at the end of the cycle.

ApplianceMaytag Washer

ModelSAV515DEWW

Level of DifficultyReally easy

Time to do repairLess than 15 mins

Age of Appliance1 - 4 years

Tools Nutdriver
Screw drivers

David From Thomaston, CT

Nov 29, 2010

5 out of 6 people found this instruction helpful

The repair was super easy and fast. I removed the back of the control panel with screwdrivers (3 flat head screws, 3 phillips head screws). Then I removed the front of the knob from the timer by removing the plastic center cover cap, plactic inner clip and lifting out the inner ring. The timer was secured by only one screw, which I removed. The wiring assembly was easy to unplug. Then I popped out the timer by sliding it to the left to clear the clips. I replaced the old timer with the new one, secured the single screw, plugged the wire assembly in, reseated the timer knob on front and replaced the control panel cover. The problem was solved and the machine works like new.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Timer - 120V 60Hz

Part Number: PS2027829

$127.68
In Stock