Oven would not shut down, kept heating

ApplianceJenn-Air Range

ModelSVD48600B

Level of DifficultyA Bit Difficult

Time to do repair1- 2 hours

Age of Appliance5 - 10 years

Tools Pliers
Nutdriver
Screw drivers

curtis From Paris, IL

Nov 28, 2010

7 out of 10 people found this instruction helpful

The front oven control panel was already in need of replacement. The digital readout had quit working sometime ago, so we began by replacing the control panel as well as the temperature probe. Neither of these items did the trick. Next I replaced the HI/Lo sensor switch. This replacement was a bit more labor intensive. Have to remove several screws and remove a large portion of the top of the stove. Once access is gained to the hi/lo switch, it takes (2) minutes to replace it. This of course did not take care of the problem either. Finally I replaced the bake/broil/convection circuit board. This was a bit of a job, only because of the amount of wires to and from this board. I litterally took a picture of the board (from this web site) and drew in the wires and marked them by color and noted where they went. I then merely unplugged each wire and with one screw, removed the board and installed the new one. After plugging in the wires as per my picture, SUCCESS. The board did the trick. Over all, it was not bad doing the work myself. I know we saved a lot of money my doing it ourselves. Just gotta have patience.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Long Oven Sensor

Part Number: PS1570174

$30.74
In Stock

Electronic Clock Control Board

Part Number: PS2077361

$304.75
Recycling Rebate Available
In Stock

High Limit Switch (Now subbed to USE WPL 74009837)

Part Number: PS2365938

$53.44
In Stock