ApplianceGeneral Electric Range
Level of DifficultyA Bit Difficult
Time to do repair30 - 60 mins
Age of ApplianceMore than 10 years
0 out of 1 people found this instruction helpful
The removal- replacement problem basically involves the shortness of the connector wires to the terminals. Because the burner is close to the top there is little room to use a screwdriver. The old unit used metal screws. The new came with open threaded holes in the terminals with two threaded screws. Used a small 1/4" ratchet which worked OK, but had to carefully bend the ends of the terminals to allow me to lower the element to an angle that would all room for ratchet action. (All design engineers should first have to work in maintenance before going to drawing board!)S. Cooke, Houston Texas
Were these instructions helpful?
Part Number: PS249411