BBB A-Plus

Washer would not spin on any cycle. The pump still work so it was not the belt.

ApplianceKenmore Washer

Model

Level of DifficultyReally easy

Time to do repair15 - 30 mins

Age of ApplianceMore than 10 years

Tools Nutdriver
Screw drivers

Richard From Newark, DE

Nov 20, 2010

10 out of 14 people found this instruction helpful

The wig wag selenoid was not shifting the transmission to the spin mode. Using a 5/16 nut driver remove the two screws holding the back access panel. Using the same driver remove the set screw holding the wig wag onto the shaft. Lift the part off the shaft. If it is hard, using a small pry bar. Install new part and reverse the process.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Wig Wag Solenoid (Now subbed to GASKET)

Part Number: PS3494346
$29.56
  Special Order