NO HEAT

ApplianceAdmiral Dryer

ModelLNC8741Q71

Level of DifficultyEasy

Time to do repair30 - 60 mins

Age of ApplianceMore than 10 years

Tools Screw drivers
Socket set

Stan From Riverside, CA

Nov 18, 2010

363 out of 365 people found this instruction helpful

LIFT THE TOP. REMOVE (2) SCREWS HOLDING THE FRONT OF THE DRYER IN PLACE. LIFT THE FRONT OFF THE 2 RETAINING CLIPS ON THE BOTTOM OF THE DRYER. THE HARDEST PART OF THE INSTALL WAS REMOVING AND REPLACING THE IGNITER. A COUPLE OF HELPING HANDS FROM THE GIRLFRIEND TO Hold the PARTS IN PLACE WHILE I replaced the two screws was very helpfull. installing the multi rib belt was also very easy with the help of a second pair of arms to reach under the drum to thread the belt onto the tensioner. the lint filter, of coarse was just a matter of throwing the old cracked one away and replacing w/ the new.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Multi Rib Belt - 92-1/4"

Part Number: PS346995

$14.08
In Stock

Igniter with Wire Harness

Part Number: PS2031055

$28.96
In Stock

Lint Filter

Part Number: PS2047808

$14.06
In Stock