dryer door not fully engaging

ApplianceWhirlpool Dryer

ModelwhirlpooldryerultracareII

Level of DifficultyEasy

Time to do repair30 - 60 mins

Age of Appliance5 - 10 years

Tools Wrench set
Screw drivers

Julie From Carlsbad, CA

Nov 18, 2010

0 out of 1 people found this instruction helpful

Our lint filter is inside. The hardest was getting the lid off. You have to unscrew the control console from the back then unscrew the remaining piece on the front then slide the top forward to open. Unsscrew the 2 screws inside the door to remove the door latch assembly. Its tough to pull the assembly off, we pried w pliers then quickly attached the new one, put in place, replace the 2 screws, slide the top back on and reattach the control console. Took about 45 min total. Be sure to unplug first!

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Door Switch - 3 Wire

Part Number: PS346704

$18.41
In Stock