Washer leaked from below tub

ApplianceMaytag Washer

ModelLAT9306AAE

Level of DifficultyA Bit Difficult

Time to do repairMore than 2 hours

Age of ApplianceMore than 10 years

Tools Nutdriver
Socket set

Robert From Little Egg Harbor, NJ

Nov 07, 2010

0 out of 1 people found this instruction helpful

First unplug the unit. Removed the front panel. Removed the two hex head bolts from under the top at hte front right and left corners. Tip the top back. Unsnap the cover being carefull on the tabs. Loosten the set screw (bolt) on the bottom of the agitator and remove. Unscrew the retaining ring. Remember reverse thread. remove flange under that. lift out inner tub. Loosten the set screw (torx) on seal and unscrew reverse thread also. Remove rubber seal boot. Clean all surfaces and reverse the steps.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Mounting Stem/Tub Seal Kit

Part Number: PS2351899

$65.19
In Stock