Level of DifficultyEasy
Time to do repair15 - 30 mins
Age of ApplianceMore than 10 years
Donald From Sierra Vista, AZ
Nov 04, 2010
5 out of 6 people found this instruction helpful
Removed front panel.
Released 2 springs on belt tensioner.
Rolled drive belt off pulleys.
Unscrewed 4 bolts holding washer motor assembly.
Tilted motor to get at pump screws.
Removed 3 pump screws and pump slid right off shaft.
Aligned new pump and reinstalled screws.
Set motor assembly loosely in place.
Rolled drive belt onto pulleys.
Re-attached tension springs.
Installed motor assembly bolts.
Re-installed front panel.
** I should have replaced drive belt at same time, but it is working with no leaks.
|Part Photo||Part Description||Price||Availability
Part Number: PS1594294